Sign-Up / Sign-In Error || MAC address is missing. Please enter the mac address
Error : MAC address is missing. Please enter the mac address.
Cause :
This issue occur when 'systeminfo' command is not working on the system.
Solution :
Go to Services > Check Windows Management Instrumentation is Running or Not.
If Not Running >> Please set Start up Type is - 'Automatic' and set Status is - 'Running'.
Once it is done.
- Open Command prompt (Run as Administrator).
- Type the following command there - net stop winmgmt
- Moreover, if it is asking Do you want to continue this operation? (Y/N) [N] : >>> Here enter -- 'Y' and enter.
- Now enter the command - winmgmt /resetrepository and enter.
- Now run systeminfo command and then check.
Hope this Helps.
Related Articles
Spectrum || Software Installation & Sign-Up / Sign-In
Install KDK Software Install Spectrum Software: Click Here to Download ! Software Sign-Up / Sign-In Process: After Installation of the Software application, below screen appears - Click on Sign Up Button and enter the required information and click ...
Sign Up Error > Time out occurred. Please try after some time.
NOTE → To open the software (Sign-Up / Sign-In), an internet connection is required to verify your license parameters. Without an active internet connection, the software will not open, and an error will occur during the verification process. ...
SIGN-IN || Forgot Password / Account Locked
If you encounter an issue logging into the software after multiple incorrect password attempts, follow the steps below to reset your password: Initiate Password Reset Go to the login screen and click on the "Forgot Password" option. Enter Registered ...
GST Software > GSTR-9C > Error Occurred, please close the browser, close the Utility and try again.
Solution: All of us know that we need to first download GSTR 9C utility from GST portal’s Download section and Import our JSON file in this through " Open GSTR-9C JSON File Downloaded from GST Portal" option, still after this our job is not over. ...
How to find the IP address of your Windows based system?
To find the IP address of your system please go through the step-by-step instructions provided below: Open Command Prompt: Press the Windows key + R to open the Run dialog. Type "cmd" and press Enter to open the Command Prompt. Type "ipconfig": In ...